Towercam · MAT

MAT Twin Peek

The tallest column in the fleet, reaching 16 feet before the head and base plate are counted.

Check availability Call 818-704-7873

Technical drawing of the MAT Twin Peek towercam showing the column retracted at 72 inches and extended to 192 inches

Specs

What it does

The biggest rooms, where the shot needs every foot of rise available.

Figures are column height. Total working height adds the remote head and base plate. Every towercam runs with a remote head and a Fluid Pictures technician.

Min height: 72" (6')
Max height: 192" (16')
Lift speed: ~3 ft/s
Payload: 120 lb
Weight: 200 lb

On set

The Twin Peek in use

MAT Twin Peek towercam extended to full height, carrying a camera above the stage and lighting truss — At full height

MAT Twin Peek towercam reaching up into a blue-lit lighting truss — Up into the truss

MAT Twin Peek towercam working beside curved LED panels displaying test patterns — Among the LED panels

MAT Twin Peek towercam raised in a blue-lit studio below the lighting grid — Studio, lit blue

Twin Peek hanging inverted from the grid, lowering a camera in front of an LED wall showing test patterns — Hung in front of the LED wall

Twin Peek rigged in the overhead grid between lighting bars, looking straight up from the stage floor — Rigged in the grid

Other sizes

The other five

Mini1' 9" – 3' 11"XS2' 6" – 4' 6"XS+2' 8" – 7'4104' 6" – 10' 6"Standard4' 4" – 15'

Previous: Standard All towercams

Book it

Is the Twin Peek the right size?

Send the position, the height you have to work with, and what needs to be in frame at the top of the rise. If another size fits better, we'll say so.

Get a towercam quote Call 818-704-7873